Turning field is used where the guide line either changes direction or several guide paths meet. Examples of this are:

  • Guideline changes direction 90 degrees (image)
  • The guide line should be split with a line that continues to the attention field by the stairs and another line that should continue to the attention field in front of the lift. (image)
  • A guideline should be split in two or more directions (picture)

The turning field is indicated by 4 x 28 cm long ST28 indicators / 8 x 13 cm ST13 indicators or 4 x 13 cm ST 13 indicators.

Delivered with one of the market’s strongest adhesives 3M VHB 5952 and with a 5-year warranty on adhesive adhesives.

100% recyclable composite material.

Choose between light grey and dark anthracite.

Turning field

£11.91

Clear

For turning fields, long or short indicators are used.

 

INFORMATION:

  • Type: Tactile direction indicators in lengths 28 cm. or 13 cm.
  • Dimensions:
    • 280 mm length / 32 mm width / 3.7 mm height incl. glue
    • 130 mm length / 32 mm width / 3.7 mm height incl. glue
  • Material: Nylon composite material reinforced with fibreglass for extra strength.
  • Environment: 100% recyclable material
  • Glue: 3M VHB 5952 (see own FDV)
  • Colours: Dark anthracite NCS S7000-N and light grey NCS S1000-N
  • Warranty: 5 year warranty on both adhesives

Use this template for efficient assembly and perfect result. The template can be used for 3 different variants:

  1. 4 long indicators
  2. 8 short indicators
  3. 4 short indicators

By default, 4 long or 8 short indicators are used. For space reasons or for aesthetic reasons, 4 short indicators may be used.

See the installation guides and videos.

Additional information

Weight 0.1176 kg
Dimensions 28 × 3.2 × 1.48 cm
Colour

Light, Dark

Velg variant

4 lange, 4 korte, 8 korte

Fitting

  • Watch installation videos
  • First clean the area with ST Naturrens.ST Naturrens. ST ST Naturrens is a natural cleanser and not dangerous to inhale. 
  • Always use mal a template for better efficiency and correct results.
  • Attach the template with tape at each end. Glue the products to the floor directly in the template. The glue is so strong that plugs, which were used before, are now superfluous.
  • Move the template over as you place the products.
  • Step on the indicators for better attachment after they are laid.
  • The indicators can be applied directly after installation, but it should not be washed until after 24 hours so that the adhesive has enough time to cure.
  • Choose the right template under related products.

You may also like…

  • Start and stop fields

    £23.83
  • Turning Field Indicators

    £390.00
  • ST-Naturrens

    £25.62
  • ST-Power Wipes

    £28.93