In projects where both a tactile guidance system for the visually impaired are to be installed together with an illuminating guidance system for escape in the event of a fire, it is recommended to install a combined solution.
This is more aesthetically pleasing and avoid two systems that run parallel and possibly crosswise. Combined products cost less than using one from each solution. There are also savings in planning and installation.
Combined indicators are used as part of the guidance system in guide lines in corridors and open areas where tactile and illuminating will otherwise run parallel to each other. They can also be used in attention fields in the row closest to the stairs to indicate the start of the stairs as is also required in the searchlight system.
You can choose between light or dark tactile colour on the indicators, as followed by the rules for choosing a contrasting colour.
Delivered with one of the market’s strongest adhesives 3M VHB5952 and with a 5-year warranty on adhesive adhesives.
Illuminating tactile indicators – 13 cm
£5.79
INFORMATION:
- Type: Tactile indicator combined with illuminating material for marking the part of the danger area where it may also be marked with illuminating
- Dimensions:
- External dimensions: 32 mm diameter width / 130 mm length / 3.7 mm height incl. glue
- Internal dimensions illuminated: 25 mm width / 120 mm length
- Material: Nylon composite material reinforced with fibreglass for extra strength
- Illuminated vinyl material for durability and strong luminance when dark or smoky
- Environment: The tactile part of the indicator is made of 100% recyclable material
- Colours: Dark anthracite NCS S7502-B and light grey NCS S2000-N
- Glue: 3M VHB5952 (see own FDV)
- Warranty: 5 year warranty on adhesive booklet
Produced in composite for reuse.
See installation guides and videos.
Additional information
| Colour | Light, Dark |
|---|
Fitting
- Watch installation videos
- First clean the area with ST Naturrens.ST Naturrens. ST ST Naturrens is a natural cleanser and not dangerous to inhale.
- Always use mal a template for better efficiency and correct results.
- Attach the template with tape at each end. Glue the products to the floor directly in the template. The glue is so strong that plugs, which were used before, are now superfluous.
- Move the template over as you place the products.
- Step on the indicators for better attachment after they are laid.
- The indicators can be applied directly after installation, but it should not be washed until after 24 hours so that the adhesive has enough time to cure.
- Choose the right template under related products.