Attention field consists of tactile indicators that are placed across the walking direction. The field indicates that there is a change in the movement pattern. Examples are the start of a staircase, the entrance to an elevator or the start of a ramp.
The depth should be 60 cm and the width the same as the field it should cover, e.g. the width of a staircase.
Select the width you want below to automatically calculate the correct number of indicators and price. You can choose between 6 different varieties. The image above shows the actual width the field will cover. If the pattern you have chosen does not show a width measurement, it is because the variant does not fit the width. Then choose another combination.
Use our smart templates for proper and efficient installation.
Attention field calculator
£37.97 – £9,064.00
Attention field
An Attention field's depth should be 60 cm, which corresponds to 8 rows of indicators. The width should be equal to the width of the object it draws attention to, such as the width of a staircase or the width of a lift door.
Choose from the following variations:
- Short indicators only
- Long indicators only
- Combi 1: short at each end with long in the middle
- Combi 2: long at each end with short in the middle
- Combi 3: Alternating: long - short - long - short - long
- Combi 4: Alternating: short - long - short - long - short
We recommend using our templates for quick and efficient assembly , see the assembly instructions and video.
The templates can be reused.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Colour | Light, Dark |
| width in cm | 80cm, 90cm, 100cm, 110cm, 120cm, 130cm, 140cm, 150cm, 160cm, 170cm, 180cm, 190cm, 200cm, 210cm, 220cm, 230cm, 240cm, 300cm, 350cm, 400cm, 450cm, 500cm |
| Variants | Shorter, Longer, Variant No. 1, Variant No. 2, Variant No. 3, Variant No. 4 |
Fitting
- Watch installation videos
- First clean the area with ST Naturrens.ST Naturrens. ST ST Naturrens is a natural cleanser and not dangerous to inhale.
- Always use mal a template for better efficiency and correct results.
- Attach the template with tape at each end. Glue the products to the floor directly in the template. The glue is so strong that plugs, which were used before, are now superfluous.
- Move the template over as you place the products.
- Step on the indicators for better attachment after they are laid.
- The indicators can be applied directly after installation, but it should not be washed until after 24 hours so that the adhesive has enough time to cure.
- Choose the right template under related products.
